Elcometer 224 Operating Instructions Manual page 8

Digital profile gauge

Hide thumbs Also See for 224:

Table of Contents

2.2 ON / OFF

To switch your gauge on, press

The gauge switches off automatically after 60 seconds; to switch off manually, press and

hold

2.3 KEYPAD

The gauge is controlled by four 'softkeys'.

The function of these softkeys varies and is described by symbols and words on the

bottom line of the screen.

2.4 INTERFACE

A serial interface is located on the side of your gauge. Connect the optional gauge-to-

PC connection cable

between your gauge and your PC and then transfer readings and

statistics (see page 27) and download welcome screens into your gauge (see page 31).

[TOP] Your gauge also has a Bluetooth

interface. Connect your gauge to your PC using

Bluetooth

for quick and easy data transfer and welcome screen download (see page 28).

2.5 LANGUAGE

The Elcometer 224 has over 20 languages built-in.

Note: When the gauge is switched on for the first time after batteries have been fitted, the display will show

the language selection screen. Press

to locate your language, then press SEL. The gauge operates

in the new language until changed.

Gauge-to-PC connection cable - see "Accessories" on page 33.

Table of Contents