R
11 [TOP] TRANSFERRING READINGS TO A COMPUTER OR PRINTER
This section (11) applies to Elcometer 224 Top gauges only.
11.1 SOFTWARE
Your gauge is supplied with ElcoMaster and ElcoMaster Mobile software. ElcoMaster allows you to:
•
Monitor measurements remotely via Bluetooth
•
Download readings data from your gauge to the ElcoMaster data management system
•
Keep your survey notes, inspection reports, photographs and all your other inspection information in
one place - ElcoMaster
•
Create accurate and professional reports configured to allow your data to be understood easily at all
levels
•
Create PDF versions of your reports and e-mail direct from ElcoMaster
•
Create a user screen and upload it to your gauge (see page 30).
ElcoMaster and ElcoMaster Mobile are on the CD supplied with your gauge and they can also be
downloaded, together with any subsequent upgrades, from the Elcometer website www.elcometer.com
Your gauge is also fully compatible with ElcoShip - see www.elcoship.com for further details.
To use ElcoMaster for data transfer, the software must be installed on your PC and your gauge must be
connected to your PC using Bluetooth or the USB cable.
11.2 INSTALLING ELCOMASTER SOFTWARE
1. Place the CD in your PC.
The software installation wizard should run automatically. If it does not run automatically:
28