Elcometer 224 Operating Instructions Manual page 28

The OPEN NEW BATCH screen is then displayed (note the 'clone' symbol at top right).
Batch number
Cancel without
creating batch
2. Press OK to create the batch
Batch numbering
The gauge automatically allocates the next batch number when a new batch is created. Up to 999 batches
can be active at any time. Deleted batches are removed from the list so that batch numbers above 999 are
valid. A deleted batch number cannot be reused until all the batches are deleted, when the batch number
count starts again at 1.
OPEN EXISTING BATCH
Opens any batch to add more readings. If the gauge is switched off with the batch open, the current batch
will re-open when the gauge is switched back on.
OPEN NEW BATCH - Batch mode (cloning)
'Cloned'
batch
symbol
Press to
create batch
R
25