Elcometer 224 Operating Instructions Manual page 9

Digital profile gauge

Hide thumbs Also See for 224:

Table of Contents

CHOOSING LANGUAGE

Either:

1. Switch gauge off.

2. Press and hold left hand softkey.

3. Press

to switch on gauge.

4. Release left hand softkey.

5. Press

to locate your language, then press SEL. The gauge operates in the new language until

changed.

Or:

Select MENU>SETUP>LANGUAGES

2.6 ZEROING YOUR GAUGE

Before taking measurements, always zero your gauge on a hard flat surface; use the glass plate supplied

with your gauge or a similar flat surface such as window glass.

1. Press ZERO.

2. When indicated by the display, place the probe on the glass plate.

The display will show 0 (zero) and is ready to use immediately.

Note: If a glass plate is not available, use the factory zero:

Select MENU>RESET>FACTORY ZERO.

Table of Contents