Table of Contents
Advertisement
4 THE CONTROLS
Your gauge is operated by a single button on the top end cap. There are three methods of pressing
the button:
Method
Press and Short
Enters into, or
Hold
exits out of the
menu struc-
ture.
Press and
Selects a
Release
menu item.
Press and Long
Switches the
Hold (10 sec-
gauge on and
onds)
off.
5 THE DISPLAY
Your gauge is equipped with two LCD
displays.
•
One display shows the gauge settings
and memory location menu items.
•
The other display shows measurement
readings.
5.1 GAUGE SETTINGS AND CONTROL
DISPLAY
The gauge settings and memory locations
are displayed as a set of top level menu
items, each of which has one or more
submenu items.
There are two menu structures used by the gauge. Choice of menu structure is determined
automatically by the gauge and depends upon the type of transducer fitted to the gauge; dual
element type or single element membrane type.
7
Action
If entering into the menu structure,
followed by scrolling through the top level menu items.
If exiting the menu items,
display shows either the current storage location (i.e.
MEMOFF
or
Once either instance has occurred, the button must be
released.
To select a top level menu item, press and release the but-
ton. The submenu items will begin scrolling on the display.
To select a submenu item, press and release again.
See "Switching on/off" on page 6.
Measurement
readings
Settings and
memory
Notes
Exit
is displayed, and then the
if data storage has been disabled.
Enter
is displayed,
A1
),
Advertisement
Table of Contents
