Table of Contents
Advertisement
There is a short delay of 5 to 6 seconds while the gauge switches on; when the gauge is ready to take
readings the display will change to the reading screen.
The unit will switch off automatically approximately 2 minutes after the last button is pressed. If, however,
you wish to switch off instantly, press and release the second function button, then hold down the ON button.
2.5 THE DISPLAY
The screen displays four numbers while you are taking readings:
Current
operating
angle
(20° , 60° , etc.)
The information shown on the display will change, depending upon which functions are selected.
ANGLE
VALUE
60°
0.0
The last value
of gloss units
(GU) read.
STORE
CV
0
0.000
The number of
The
stored
Coefficient of
readings at the
Variation of the
angle
stored
displayed.
readings at the
angle
displayed.
9
Advertisement
Table of Contents
