Personalised Welcome Screen - Elcometer 224 Operating Instructions Manual

R

12 PERSONALISED WELCOME SCREEN

A personalised welcome screen can be created and downloaded into the gauge.
Screen dimensions are 128 pixels x 64 pixels. The welcome screen is typically used to personalise the
gauge with a logo, serial number, user name, etc. This is the first screen displayed when the gauge is
switched on.
12.1 [STANDARD] GAUGES
Download the Elcometer 'Welcome Screen Wizard' software from www.elcometer.com/downloads
CREATING THE SCREEN
1. Connect your gauge to your PC using the optional gauge-to-PC connection cable.
2. Switch on the gauge.
3. Run 'Welcome Screen Wizard' software and follow the on-screen instructions.
DELETING THE SCREEN
1. Run the 'Welcome Screen Wizard' software.
2. Click 'Next'.
3. Select 'Create a new screen setup'.
4. Click 'Next'.
5. Select 'Disabled'.
6. Click 'Next'.
Follow the remaining on-screen instructions to delete the welcome screen.
31