Elcometer 224 Operating Instructions Manual page 25

R
9.3 USING YOUR GAUGE MEMORY
The memory in your gauge is accessed using the DATA MENU.
To access the DATA MENU press the DATA,
(these softkeys are only displayed with EXTENDED MENU on).
The functions in the DATA MENU are described below:
EXIT BATCHING
Returns the gauge to immediate mode and no further readings are stored in memory. The Reading Screen
is displayed.
OPEN NEW BATCH
Opens (creates) a new batch using the next available batch number.
• To create a batch with new settings use OPEN NEW BATCH in immediate mode.
• To create a batch with a copy of the settings from another batch use OPEN NEW BATCH in batch
mode (known as cloning
Opening new batch in immediate mode
1. Ensure that a batch is not already open and then press DATA>OPEN NEW BATCH.
Wait a few seconds while the batch is set up.
g. Cloning is typically used when several areas are being tested. Cloning allows the settings for an area to be quickly
and easily duplicated.
22
g
a batch).
or softkey