Elcometer 224 Operating Instructions Manual page 19

R
• UNITS - Select from µm, mil or thou.
• AUTO SWITCH OFF - Changes delay before gauge switches off.
Minimum = 1 minute (default); Maximum = 10 minutes; 'Off' = disabled
• OUTPUT - Selects [TOP] Bluetooth
interface - see "Interface" on page 5.
• [TOP] BLUETOOTH PC REPLY - Toggle tick box to activate/deactivate. When activated, and a
®
Bluetooth connection is established between your gauge and a PC, the gauge will expect a reply
from the PC after each reading is taken. See page 30 for further information.
• BAUD RATE - Sets baud rate between 1200 and 19200. The default value is 9600 baud.
• RS232 BIT IMAGE - Toggle tick box to activate/deactivate. When activated, readings are sent to the
RS232 interface as they are taken. All images and characters are output as bit-maps.
• RS232 PLAIN TEXT - Toggle tick box to activate/deactivate. When activated, readings are sent to
the RS232 interface as they are taken. The gauge sends standard ASCII characters from the Courier
e
New font set . This allows printing on devices such as RS 232 printers or PC via Elcometer software
(page 28) or via HyperTerminal (or similar programs).
• BEEP VOLUME - Changes volume. 0 = off; 5 = loudest; Default = 3.
• LANGUAGES - Selects menu language.
• LARGE FONTS - Toggle tick box to activate/deactivate. When activated, all menus and screens are
displayed using double height, single width fonts (for improved legibility, if needed).
e. When RS232 Plain Text is selected the following languages will be output as English: Chinese, Greek, Hebrew, Jap-
anese, Korean, Russian, Lithuanian, Farsi.
16
®
PC Reply option, baud rate and activates data output via the