Elcometer 224 Operating Instructions Manual page 32

• Click Start > Run
• Type D:AutoCIS (where 'D' is the letter of your CD drive)
• Click OK. The software installation wizard will run.
2. Follow the on-screen installation instructions.
Follow the instructions included with ElcoMaster to interface your gauge with your PC.
If at any time ElcoMaster requests a PIN number for your gauge, press Menu>Bluetooth. The Bluetooth PIN is
displayed next to Authentication. Note that each gauge has a unique PIN - use only the PIN for your gauge.
11.3 CABLE CONNECTION
1. Connect your gauge to your PC using the optional gauge-to-PC connection cable.
2. Switch on your gauge and ensure the Reading Screen is displayed.
3. Start the software and follow the instructions included with the software.
®
11.4 BLUETOOTH CONNECTION
Full instructions on how to interface your gauge with ElcoMaster and download data are included in the
ElcoMaster help file supplied with the software.
®
BLUETOOTH CONNECTION ICON
®
When a Bluetooth connection is established between your gauge and a PC, the gauge beeps twice (high
tone) and shows a flashing Bluetooth
connection is closed or lost, the gauge beeps twice (low tone) and the icon is removed.
®
icon next to the battery status symbol on the display. When the
R
29