Settings On The Copy Screen - Konica Minolta bizhub 1250 User Manual

4.6 Adding Fold Lines (Creases) for Fold & Stapled/Multi Half-Folded Cover
NOTICE
The fold and crease positions may be displaced depending on the paper weight. In this case, adjust the crease
position to suit the fold position. See page 5-42 for details.
d
Reference
Please check paper information before use. See "Paper Information" (page 2-12) for details.
4.6.2

Settings on the Copy Screen

1
Position the original.
% The number of original sheets set will be the number of pages for fold & stapled or half-folded out-
put, thus determining the number of folded sheets. For information on the number of folded sheets,
see page 2-13.
2
Load fold & stapled or multi half-folded cover sheet into a tray.
% Load cover paper into [Tray1] to [Tray11]. The [PI-PFU Tray] or [PI Tray] is not available for covers.
% In bizhub PRESS 1250/1250P/1052, use [Paper Presetting] to change the paper setting for paper
loaded temporarily onto a tray. See the User's Guide supplied with this machine for details on [Paper
Presetting].
3
Press [COPY] tab to display the Copy Screen.
4
Press [Output Setting].
The Output Setting Screen will be displayed.
5
Select [Fold&Staple] or [Multi Half].
The Fold & Staple Setting Screen or Multi Half-Fold Setting Screen will be displayed.
Saddle Stitcher SD-513
4
4-37