Konica Minolta bizhub 1250 User Manual page 106

4.13 Combining Perfect Binder PB-503
2
Select the tray loaded with covers.
% Press [Change Set] on the right of [Cover Tray], then select the tray to which the cover paper has
been loaded.
% Selecting one from [Tray1] to [Tray11] enables the covers to be printed. Cover print cannot be per-
formed if any other tray is selected. The number of displayed trays varies depending on which op-
tions are installed.
% When Saddle Stitcher SD-513 is attached, and a tray other than the cover tray of a perfect binder
is selected for cover, both the crease and 2-side slitting functions of a saddle stitcher are available
for cover. For details, refer to page 4-30 and page 4-45.
% Press [Change Paper Setting], and modify the settings as required.
3
Press [OK] on the Cover Tray Screen.
The Perfect Bind Screen will be restored.
Saddle Stitcher SD-513
4
4-69