Konica Minolta bizhub 1250 User Manual page 14

2.1 Machine Configuration
External view of Saddle Stitcher SD-513
No. Name
1 Saddle stitcher front door
2 Slit scrap box door
3 Trim scrap tray
4 Clamp section upper door
5 Clamp section
6 Clamp section handle
7 Folding outlet door
8 Stopper
9 Bundle exit tray extension
10 Secondary (sub) tray
11 Paper detection sensor
12 Tri-fold tray
13 Conveyance belt
14 Bundle exit tray
15 Bundle exit tray outlet
16 Output roller
Saddle Stitcher SD-513
Description
Opens to allow removal of mishandled paper.
When the optional Trimmer Unit TU-503 is mounted,
opened for removal of slitting scraps in the slit scrap
box.
Withdrawn for removal of fore-edge trimmings in the
trim scrap box.
Opened for removal of mishandled paper inside the
folding unit, and for cleaning the conveyance belts.
Opened for removal of mishandled paper inside the
fold conveyance section, fold & staple section, or half-
fold section. Open the saddle stitcher front door to ac-
cess the clamp section.
Hold the lock release lever while opening the clamp
section. Hold the lock release lever while closing the
clamp section.
Opened for removal of mishandled paper inside the
folding outlet.
Prevents output sheets from falling off the bundle exit
tray.
Opened for delivery of output sheets onto the bundle
exit tray.
Holds output sheets that are delivered from the equip-
ment attached to the right side of the machine without
being processed in Fold & Staple, Multi Half-Fold, or
Multi Tri-Fold mode. Also holds output delivered after
performing creasing or 2-side slitting using Trimmer
Unit TU-503 or Creaser Unit CR-101.
Detects output sheets delivered on the conveyance
belt to prevent from falling off.
Holds sets output in Tri-Fold mode.
Carries output sheets leftward.
Holds fold & stapled or half-folded sets processed by
the machine.
Delivers fold & stapled or half-folded sets processed
by the machine.
Straightens fold & stapled or half-folded sets pro-
cessed by the machine.
2
2-5