Specifying Copy Settings - Konica Minolta Di1610 User Manual

5
5.5

Specifying Copy Settings

When the machine is turned on or the [Panel Reset] key is pressed, the machine is
automatically reset to its initial mode. By changing the default settings, you can
change the initial mode. Refer to the following table for the default settings for each
function.
No. Name
1 PAPER PRIORITY
2 DENSITY PRIORITY
3 DENSITY LEVEL (A)
*(A) : Auto
4 DENSITY LEVEL (M)
*(M) : Manual
5 OUTPUT PRIORITY
6 RESOLUTION
5-18
Description
The tray that is given priority can be set to either "Tray1" or "Tray2".
• The factory default setting is "TRAY1".
The density that is selected when the machine is turned on or the [Panel
Reset] key is pressed can be set to "AUTO", "MANUAL" or "PHOTO".
• The factory default setting is "AUTO".
The default Auto density level setting can be set to "LIGHT (–1)",
"NORMAL (0)" or "DARK (+1)".
• The factory default setting is "NORMAL (0)".
The default manual density level setting can be set to one of nine levels
between –4 and +4, with the normal print density at 0.
If a smaller number (toward –) is selected, the print becomes lighter. If
a larger number (toward +) is selected, the print becomes darker.
• The factory default setting is "NORMAL (0)".
The finishing setting that is selected when the machine is turned on or
the [Panel Reset] key is pressed can be set to "NON" or "SORT".
• The factory default setting is "NON".
The default resolution when scanning with the Auto Document Feeder
×
can be set to "600 dpi 300 dpi" or "600 dpi
• The factory default setting is "600 dpi
5.5 Specifying Copy Settings
×
600 dpi".
×
300 dpi".
Di1610/Di1610p