Saddle Stitcher Sd-513; Creaser Unit Cr-101 (Equipped In Saddle Stitcher Sd-513) - Konica Minolta bizhub 1250 User Manual

8
8.1.2

Creaser Unit CR-101 (equipped in Saddle Stitcher SD-513)

Name
Type
Function
Crease
Through
pass
Size
Weight
Power supply
Power consumption
8-4
CR-101
Creaser unit for crease blade driving
Crease Adds creases (fold lines) on sheets.
Through pass Outputs sheets to the finishing device without processing.
Number of creases 1 to 4 pieces
However, the following rules are provided depending on which func-
tion is combined with the Crease function.
•
•
•
•
Paper size Standard:
A3 w, B4 w, A4 w, B5 w, Foolscap, SRA3 w, SRA4 w, 12 e 18 w,
11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w
Custom:
min. 4.72" e 10.12" to max. 13.03" e 19.21" (min. 120 mm e 257 mm
to max. 331 mm e 488 mm)
Wide paper
Paper weight 21 to 93 lb Bond (80 g/m
However, the maximum weight conforms to the specifications of the
combined functions.
Crease position Inlet edge stopper (Output edge side of main body)
standard
Setting unit 0.1 mm
Min. line interval 1.0 mm
Paper size Standard:
A3 w, B4 w, A4 w, B5 w, Foolscap, SRA3 w, SRA4 w, 12 e 18 w,
11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w
Custom:
min. 4.72" e 10.12" to max. 13.03" e 19.21" (min. 120 mm e 257 mm
to max. 331 mm e 488 mm)
Wide paper
Paper weight 11 to 93 lb Bond (40 g/m
8.31" (W) e 18.11" (D) e 5.39" (H) (211 (W) e 460 (D) e 137 (H) mm)
14.99 lb (6.8 kg)
DC 5/24 V (Supplied from Saddle Stitcher SD-513)
25 W or less
Fold & Staple / Half-Fold + Crease: 1 piece
Tri-Fold + Crease: 2 pieces
Perfect Binding + Crease: 2 or 4 pieces (with gutter fold lines)
Crease only: 1 to 4 pieces
2
to 350 g/m
2
to 350 g/m
Typical Specifications
2
)
2
)

Saddle Stitcher SD-513

8.1