Konica Minolta bizhub 1250 User Manual page 122

4.14 Functions of Printer Driver
Function Name
[Crease]
[Crease Settings]
Reference
-
The [Spine Corner Forming] function is available only when Folding Unit FD-504 is installed on this ma-
chine.
-
The [2-Side Slitting] function is available only when Trimmer Unit TU-503 is installed on this machine.
-
The [Crease] function is available only when Creaser Unit CR-101 is installed on this machine.
Fold & Staple Settings
Function Name
[Number of Center Staples]
[Spine Corner Forming]
[Spine Corner Forming
Strength]
Saddle Stitcher SD-513
Option
Off, On
Crease Side: Front
Crease Side: Back
-
Option
2 Positions, 4 Positions
Off, On
-2 to +2
Setting item
Adds creases to fold paper, prevent-
ing toner flaking from occurring at the
time of paper folding. Specify wheth-
er to enable creasing.
Specify the crease side.
Specify the crease details.
Setting item
Set the number of staples to 2 posi-
tions or 4 positions. However, 4 Posi-
tions is available only for the
following paper sizes: A3, A3W,
11 e 17, 11 e 17W, and custom size.
Applies pressure to the spine of the
folded & stapled booklet, and forms a
spine corner.
Specify the strength to press the
spine when forming a spine corner.
4
4-85