Konica Minolta bizhub 1250 User Manual page 124

4.14 Functions of Printer Driver
Function Name
[Offset against Cover]
[Unit]
Saddle Stitcher SD-513
Option
-1.0 to 1.0 (mm)
-
Setting item
Enter the differential slitting to be ap-
plied to sheets other than the cover
when [All Sheets] is selected for slit-
ting.
The value, which is obtained by add-
ing or subtracting this setting value to
or from the values specified in [Top
Slitting] and [Bottom Slitting], is ap-
plied to sheets other than covers. Ad-
justing to the plus (+) side increases
the slitting of the body against the
cover.
Adjusting to the minus (-) side de-
creases the slitting of the body
against the cover.
Even if the slitting is adjusted to either
the plus (+) side or minus (-) side, the
cover height remains unchanged.
Specify the unit in millimeters or inch-
es.
4
4-87