Konica Minolta bizhub 1250 User Manual page 103

4
0 Multi-feed detection is a feature that automatically stops the machine if more than one sheet is fed at
a time. The post inserter is designed to operate this function. Some paper type, such as smooth surface
paper, may activate this function even if a single sheet is fed, and may stop the machine as a result.
Should this case occur frequently, press the multi-feed detection button and light up the lower lamp, in
order to turn the function OFF.
1
Place paper in the upper tray of the post inserter, then align the
guides with paper.
Function
Corner Staple/2 Posi-
tion Staple
Punch
Fold
Fold & Staple
% To fold or fold & staple booklet-styled (magazine bound) prints manually, arrange the printed sheets
as shown below before placing them into the post inserter.
Magazine bound print
2
Select the desired function.
% Press staple selection button, punch selection button or fold selection button, and turn on the
desired mode lamp.
% Punch and Corner Staple/2 Position Staple are compatible. To use them in combination, turn on the
lamps of both functions.
4-66
Manually Using Folding Unit FD-503 or Saddle Stitcher SD-513
Positioning of paper
Place paper face up.
Place paper face up.
Place the face to be inside the
fold up.
Place the face to be inside the
booklet up.
Arrange sheets in the reverse order
[1]: Staple selection button
[2]: Punch selection button
[3]: Fold selection button
Saddle Stitcher SD-513
4.12