Adding Fold Lines (Creases) For Multi Tri-Folded Paper; Functional Overview - Konica Minolta bizhub 1250 User Manual

4
4.7

Adding Fold Lines (Creases) for Multi Tri-Folded Paper

4.7.1

Functional Overview

When the machine uses Creaser Unit CR-101 equipped in Saddle Stitcher SD-513, 2 pieces of crease can
be added on the folded section so that sheets can be tri-folded.
Setting item
[Multi 3-Fold]
Multi Tri-Fold Set-
ting Screen,
[Crease] to be set to
[ON]
NOTICE
The fold and crease positions may be displaced depending on the paper weight. In this case, adjust the crease
position to suit the fold position. See page 5-42 for details.
4-42
Adding Fold Lines (Creases) for Multi Tri-Folded Paper
Details
Adds 2 creases on tri-
fold sections, and fold
sheets in three. In this
case only one sheet is
folded. Multi tri-fold is
not performed.
Illustration
4.7
Saddle Stitcher SD-513