Konica Minolta bizhub 1250 User Manual page 15

2
Internal view of Saddle Stitcher SD-513
No. Name
17 Lever [SD1]
18 Knob [SD2]
19 Lever [SD3]
20 Knob [SD4]
21 Creaser Unit CR-101 (option)
22 Lever [SD5]
23 Knob [SD15]
24 Trimmer Unit TU-503 (option)
25 Slit scrap box
26 Scrap box lock release lever
27 Knob [SD16]
28 Knob [SD6]
29 Knob [SD7]
30 Lever [SD8]
31 Lever [SD9]
32 Knob [SD10]
33 Knob [SD11]
34 Knob [SD13]
35 Lever [SD12]
36 Fold & staple section
37 Stapler
38 Booklet transfer section
39 Knob [SD14]
40 Secondary (sub) tray cover
41 Lever [SD17]
42 Lever [SD18]
43 Folding Unit FD-504 (option)
44 Trim scrap box
2-6
Machine Configuration
Description
Opens upward for removal of mishandled paper.
Turned to allow removal of mishandled paper from
Creaser Unit CR-101 or while being fed.
Opens rightward to allow removal of mishandled pa-
per from Creaser Unit CR-101 or while being fed.
Turned to allow removal of mishandled paper from
Creaser Unit CR-101 or while being fed.
Adds fold lines on sheets.
Opens rightward to allow removal of mishandled pa-
per from Creaser Unit CR-101 or while being fed.
Turned clockwise to allow removal of mishandled pa-
per from Trimmer Unit TU-503.
Trims both sides of sheets.
Withdrawn for removal of slit scraps.
Pulled to release lock when withdrawing the slit scrap
box for removal of slit scraps.
Turned counterclockwise to allow removal of mishan-
dled paper from Trimmer Unit TU-503.
Turned clockwise for removal of mishandled paper.
Turned counterclockwise for removal of mishandled
paper.
Opens upward for removal of mishandled paper.
Opens rightward for removal of mishandled paper.
Turned clockwise for removal of mishandled paper.
Turned counterclockwise for removal of mishandled
paper.
Turned to allow removal of mishandled paper.
Opens downward for removal of mishandled paper.
Used to staple the center line of paper.
Staples on 2 or 4 positions when performing fold &
staple.
Conveys folded paper (booklets) to the clamp sec-
tion.
Turned to allow removal of mishandled paper.
Opened to allow removal of mishandled paper inside
the tri-fold conveyance section.
Opens upward for removal of mishandled paper.
Opens downward for removal of mishandled paper.
Forms spine corners on fold & stapled booklets.
Holds waste fore-edge trimmings.
2.1
Saddle Stitcher SD-513