Disposing Trimmings; Emptying Trim Scrap Box Of Saddle Stitcher Sd-513 - Konica Minolta bizhub 1250 User Manual

3
3.2

Disposing Trimmings

Saddle Stitcher SD-513 is equipped with a trimmer.
This section describes indications on the screen to inform you that the disposal of trimmings is due, and also
instructions on how to dispose it.
3.2.1

Emptying Trim Scrap Box of Saddle Stitcher SD-513

When the trim scrap box of Saddle Stitcher SD-513 becomes full, the following message will appear in the
message area of the screen.
[Fore-edge trimming scrap box is full / Please empty trimming scrap box]
Also, the message [SD trim scrap is full] appears and its indicator lights in red in the Supply/Scrap Parts area
of the Machine Screen.
Follow the procedure below to dispose of trim scraps.
NOTICE
The trim scrap box is not disposable. Be sure to return it to the trim scrap tray after disposing of trim scraps.
1
Press [
A help message for the Machine Screen will be displayed at the top of the screen.
2
Press [Consumable/Scrap] at the lower-right corner of the help message area.
3-4
] at the upper-right corner of the Machine Screen, or press [Help] on the control panel.
Disposing Trimmings
Saddle Stitcher SD-513
3.2