Setting Scanner Emulation Synapse Cable Options - Allen-Bradley 2755-HDG-4 User Manual

Setting Scanner Emulation Synapse Cable Options

The following define the communication options available when the
scanner is connected to the following scanner emulation interface cable:
•
Catalog No. 2755-HFC-SA1-01
Default Settings
Scan the SET SCANNER EMULATION CABLE DEFAULTS bar code
to set the interface cable to default settings. Refer to the table below for
the default settings.
Item
Emulation
Leading Margin
Decode LED
Emulation Timeout
Polarity
Unknown Characters Send Bar Codes with
Convert All to Code 39 Disabled
Code 39 to Code 39
Full ASCII
Parameter Set
Bar Code Programming Guide for Decoded Scanners (Publication 2755-6.5).
Communication Setup (Cable Configuration)
Default Setting
Standard
80 Millisecond
Enabled
3 Seconds
Margin Low / Bar High
Unknown Characters
Disabled
Parameter Set 1
Refer to
Description
on Page: Page Reference
4-20
4-20
4-20
4-21
4-21
4-21
4-22
4-22
4-23
Publication 2755-6.2
4-19
Programming
Guide
7-2
7-3
7-3
7-4
7-5
7-5
7-6
7-6
7-7