Define The Devicenet Address; Configure The Scanner - Allen-Bradley 2755-SN3 Application Manual

Define the DeviceNet Address

1. Click the Device button on the Project dialog.
2. Select a DeviceNet address.
3. Connect the 2755-NC43 or -NC48 Configuration Cable to the
reader.
4. Click the Apply button to send the DeviceNet address to the
reader.
5. Click Save and Close to return to the main Project dialog.

Configure the Scanner

1. Click the Scanner button on the Project dialog to open the
Scanner dialog.
2. Configure the scan pattern and use the Focus procedure for
optimum scanner focus.
3. Click the Close button to return to the main Project dialog.
Using the Auto-Load Function 1–5
Publication 2755-6.8