Allen-Bradley 2755-HDG-4 User Manual page 33

2-14 Connecting and Operating Scanner
Scanner to Flexible Interface (RB) Module Application
Use the 25-Pin RS-232 Synapse cable (Catalog No. 2755-HFC-SR2-01)
to connect the scanner cable to a port on the Flexible Interface Module
(Catalog No. 2760-RB). The protocol cartridges (Catalog No.
2760-SFC1, -SFC2) support RS-232 communications.
Power Supply
Note: The power supply
should be connected last.
To RB Module Communications Port
Refer to the user manual for the Flexible Interface Module for the proper
configuration. Make sure the Synapse cable communications settings
match the Flexible Interface Module settings for the port.
Publication 2755-6.2
Scanner Cable
RS-232 Synapse Cable
(2755-HFC-SR2-01)
SFC1, SFC2 Protocol Cartridge
Flexible Interface Module
Scanner