Configuring The Scanner And Synapse Cables - Allen-Bradley 2755-HDG-4 User Manual

2-20 Connecting and Operating Scanner
Configuring the Scanner and Cables
Configure the scanner, Synapse and AdaptaScan Pass Through cables by
scanning the bar codes in the Bar Code Programming Guide for Decoded
Hand-Held Scanners (Publication 2755-6.5). The scanner is always
enabled to read the Code 128 configuration bar codes used for
configuring the scanner. Refer to:
•
Scanner Configuration (Chapter 3)
•
Communication Setup, Cable Configuration (Chapter 4)
Publication 2755-6.2