Adaptascan Pass Through Cable Connection - Allen-Bradley 2755-HDG-4 User Manual

2-10 Connecting and Operating Scanner

AdaptaScan Pass Through Cable Connection

The standard Pass Through cable has a 25 pin male DB connector.
When connecting the cable to an AdaptaScan RS-232 terminal block,
you will need to attach an unterminated cable with a female 25 pin DB
connector on one end. Power for the scanner is provided by the package
detect terminal block connector.
Important: Power for the scanner (from Package Detect terminals) is
not provided until the Reader is installed on the wiring base.
AdaptaScan Pass Through Cable
Custom Cable (see next page)
ATTENTION: Turn off all power to the AdaptaScan
wiring base before making cable connections. Failure to
!
follow this caution could result in electrical shock and/or
damage to the scanner or AdaptaScan wiring base.
Publication 2755-6.2
AdaptaScan Wiring Base
Scanner