Scanner Emulation Synapse Cable Connections
Use the scanner emulation Synapse cable to provide undecoded output to
a scanner input port of a bar code decoder (cable has female 9-pin DB
connector). The following scanner emulation cable is available.
A separate power supply provides power to the scanner. The power
supply plugs into the scanner emulation Synapse cable.
Power Supply
Note: The power supply
should be connected last.
ATTENTION: Do not install the scanner emulation
Synapse cable with power applied to either the Synapse
!
cable or decoder. Failure to follow this caution may result
in damage to the scanner, Synapse cable, or decoder.
Connecting and Operating Scanner
Catalog No. 2755-HFC-SA1-01
Scanner Cable
Scanner Emulation Synapse Cable
(2755-HFC-SA1-01)
To Bar Code Decoder
2-5
Scanner
Publication 2755-6.2