Setting IBM PC Keyboard Wedge Synapse Cable Options
The following define the communication options available when the
scanner is connected to one of the following IBM AT/XT or PS/2
keyboard wedge Synapse cables:
•
Catalog No. 2755-HFC-SP1-01
•
Catalog No. 2755-HFC-SP2-01
Settings
Defaults
Scan the SET PC WEDGE SYNAPSE CABLE DEFAULTS bar code to
set the interface cable to default settings. The following table lists the
default settings.
Item
Host
Country
Bar Codes with
Unknown Characters
Intercharacter Delay
Parameter Set
Bar Code Programming Guide for Decoded Scanners (Publication 2755-6.5).
Communication Setup (Cable Configuration)
Default Setting
IBM PC/AT
IBM PS/2-50, 55SX, 60, 70,
80
North American
Send Bar Codes With
Unknown Characters
5 milliseconds
Parameter Set 1
Refer to
Description
on Page:
Page Reference
4-10
4-10
4-11
4-11
4-12
Publication 2755-6.2
4-9
Programming
Guide
4-2
4-3
4-4
4-4
4-5