Allen-Bradley 2755-HDG-4 User Manual page 80

4-24 Communication Setup (Cable Configuration)
AdaptaScan Pass Through Cable Options
The following define the communication options available when the
scanner is connected to the AdaptaScan pass through cable.
•
Catalog No. 2755-HDC-GA2-08
Default Settings
Scan the SET ADAPTASCAN PASS THROUGH CABLE DEFAULTS
bar code to set the default settings. The table below lists the defaults.
Item
Baud Rate
Parity
Stop Bits
Data Bits
Hardware Handshaking
Software Handshaking
Beep on BEL
Intercharacter Delay
Bar Code Programming Guide for Decoded Scanners (Publication 2755-6.5).
We recommend that you set Parity = None, Stop Bits = 1, and Data Bits = 8 for
communication with the AdaptaScan Bar Code Reader.
Publication 2755-6.2
Default Setting
9600
Even
2
7
None
None
Disabled
0
Refer to
Description
on Page: Page Reference
4-25
4-25
4-26
4-26
4-27
4-28
4-29
4-26
Programming
Guide
2-26
2-27
2-28
2-28
2-29
2-30
2-31
2-32