Chapter 3 Configuring The Scanner; Important Notes On Configuring A Scanner; Scanner Configuration Bar Codes - Allen-Bradley 2755-HDG-4 User Manual

This chapter describes the scanner configuration options.

Important Notes on Configuring a Scanner

Be aware of the following when configuring the scanner:
•
Both the scanner and Synapse cable configuration bar codes are
located in the Bar Code Programming Guide for Hand-Held Scanners
(Publication 2755-6.5).
•
Configure the scanner for use with a Synapse cable or AdaptaScan
Pass Through cable. Separate scanner configuration codes are used
for each cable type. Make sure you use the correct configuration
codes. The programming guide has separate tabbed sections for
Scanner Configuration (for Synapse Cable) and Scanner
Configuration (for AdaptaScan Pass Through Cable)
•
Chapter 4 describes the communication setup (cable configuration)
codes for the RS-232, keyboard wedge cable, scanner emulation, and
AdaptaScan Pass Through cables.

Scanner Configuration Bar Codes

All programming codes may be found in the Bar Code Programming
Guide for Hand-Held Scanners (Publication 2755-6.5). The scanner is
always enabled to read Code 128 configuration labels since all
configuration codes use this symbology.
Configuring the Scanner
Chapter
Publication 2755-6.2
3