Setting Scanner Emulation Synapse Cable Options
This section defines the communication options available when the
scanner is connected to this Scanner Emulation Synapse cable:
•
Catalog No. 2755-HFC-SA1-01
Default Settings
Scan the Set Scanner Emulation Cable Defaults bar code to set the
Synapse cable to default settings. Refer to the table below for the
default settings.
Parameter
Emulation
Leading Margin
Decode LED
Emulation Timeout
Polarity
Unknown Characters Send Bar Codes with
Convert All to Code 39 Disabled
Code 39 to Code 39
Full ASCII
Parameter Set
Programming Guide for 2-D Bar Code Scanners (Publication 2755-6.7)
Communication Setup (Synapse Cable)
Default Setting
Standard
80 Millisecond
Enabled
3 Seconds
Margin Low / Bar High
Unknown Characters
Disabled
Parameter Set 1
Refer to
Description
on Page:
Page Reference
5–20
5–20
5–20
5–21
5–21
5–21
5–22
5–22
5–23
Publication 2755-6.4
5–19
Programming
Guide
6-2
6-3
6-3
6-4
6-5
6-5
6-6
6-6
6-7