Allen-Bradley 2755-HDG-4 User Manual page 92

The scanner operates automatically when used with an adjustable stand:
•
2755-HFN-K1
•
2755-HFN-K2
To use the stand for hands-free operation:
1. Adjust the stand at a distance and angle suitable for the labels you are
scanning.
2. Place the scanner in the stand, the scanner will turn on and begin
scanning. You do not need to press the trigger.
3. The scanner will remain scanning until a readable bar code symbol is
placed under the scan line. After reading the label the scanner will
stop scanning, attempt to transmit the data, and then resume scanning.
4. If the scanner does not scan a bar code symbol within the configured
Stand Operation Timeout, the scanner will enter a reduced power
mode (blinking scan). Normal scanning resumes once a bar code
symbol is read.
Hands-Free Stand Operation
Appendix B
Publication 2755-6.2