Scanner Cable - Allen-Bradley 2755-HUG-4 User Manual

2–2

Scanner Cable

The scanner cables connect to the bottom of the scanner handle.
See page 1–8 for lengths available.
To attach the scanner cable to the scanner.
1. Pull back the locking collar from the connector.
2. Insert the cable connector into the scanner.
3. Align the tabs on the locking collar with the slots on the handle.
4. Push in and turn the locking collar counterclockwise to lock.
Connector is locked when flat edge of locking collar aligns with the
flat edge of the scanner handle.
Remove a scanner cable by rotating the locking collar clockwise until the
cable can be pulled out of the scanner.
Publication 2755-6.1
Slot for Locking Collar
Connector
Locking Collar
Cable Connector