Allen-Bradley 2755-HDG-4 User Manual page 17

Some applications may not require a power supply when the host provides adequate
power for the scanner. This ability of the host to power the scanner will vary with
system configurations. The scanner with cable requires 150 mA at 5 volts (typical).
Power Supplies – Connect to RS-232, keyboard
wedge or scanner emulation Synapse cable.
Provides power for the scanner .
•
100 - 240 VAC, 50 - 60 Hz
(Catalog No. 2755-HFP-D1)
•
Power cable for power supply, IEC 320,
terminated, US 110V AC
(Part No. 77121-801-01)
•
Power cable for power supply, IEC 320,
unterminated, US 240V AC
(Part No. 77121-801-02)
•
Power cable for power supply, IEC 320,
unterminated, European 240V AC
(Part No. 77121-801-03)
Keyboard Wedge Synapse Cables – Connects
between keyboard and host device. Host device
receives decoded bar code data the same as
keyboard input. See page 2–8 for connections.
•
For IBM XT/AT keyboard, 5-pin DIN
(Catalog No. 2755-HFC-SP1-01)
•
For PS/2 keyboard, 6-pin Mini-DIN
(Catalog No. 2755-HFC-SP2-01)
•
For DEC VT220, 320, 420 keyboards
(Catalog No. 2755-HFC-SV1-01)
•
For DEC VT520 keyboards
(Catalog No. 2755-HFC-SV2-01)
Scanner Features
Publication 2755-6.2
1-9