Chapter 2 Connecting And Operating Scanner; Overview - Allen-Bradley 2755-HDG-4 User Manual

2-2 Connecting and Operating Scanner

Overview

The scanner may be connected to a variety of host devices through an
interface cable. The communication parameters for the cables are
configured by scanning bar codes. There are four types of cables:
•
Scanner Emulator Synapse cable
•
RS-232 Synapse cable
•
Keyboard Wedge Synapse cable
•
AdaptaScan Pass Through cable
Note: The AdaptaScan Pass Through cable (Catalog No.
2755-HDC-GA2-08) provides a physical link between the scanner's
output connector and a user supplied custom cable connected to an
AdaptaScan Bar Code Reader's RS-232 and power terminal blocks.
All configuration bar codes are in the Bar Code Programming Guide for
Decoded Hand-Held Scanners (Publication No. 2755-6.5).
Publication 2755-6.2