Select Cable Type; Select Symbologies - Allen-Bradley 2755-HDG-4 User Manual

Hand-held decoded barcode scanners

Table of Contents

3–4

Configuring the Scanner

Select Cable Type

Important: Select the cable type before configuring the scanner. The

scanner configuration codes (and some options) for each cable type

(Synapse and AdaptaScan Pass Through) are different. Each

configuration is stored separately. The selections are:

•

Enable Synapse Cable

•

Enable AdaptaScan Pass Through Cable (default)

After configuring the scanner, you can switch between configurations by

scanning the cable selection bar code.

Scan the bar code labels for the symbologies you want the scanner to

decode. Only enable the symbologies you expect to read. The scanner

automatically discriminates between all of the following symbologies.

The only exception is that the scanner cannot discriminate between Code

39 and Code 39 Full ASCII. The scanner can read and decode the

following symbologies. All symbologies are enabled by default.

UPC-A

Code 39

EAN 8

Interleaved 2 of 5

Codabar

MSI / Plessey

EAN 128

To enable a symbology, scan the ENABLE bar code for the symbology.

To disable a symbology, scan the DISABLE bar code.

Publication 2755-6.2

UPC-E

Code 39 Full ASCII

EAN 13

Discrete 2 of 5

Code 128

Code 93

Table of Contents