Scanner Emulation Synapse Cable Connections
Use the Scanner Emulation Synapse cable to provide undecoded
output to a scanner input port of a bar code decoder (cable has
female 9-pin DB connector).
A separate power supply provides power to the scanner. The power
supply plugs into the Scanner Emulation Synapse cable.
Power Supply
Note: Connect the power
supply last.
ATTENTION: Do not install the Scanner Emulation
Synapse cable with power applied to either the Synapse
!
cable or decoder. Failure to follow this caution may
result in damage to the scanner, Synapse cable, or
decoder.
Connecting the Scanner
Catalog No. 2755-HFC-SA1-01
Scanner Cable
Scanner Emulation Synapse Cable
(2755-HFC-SA1-01)
To Bar Code Decoder
2–5
Scanner
Publication 2755-6.4