The RBT‐8100 Wireless Switch provides a custom Linux platform designed to support the
RoamAbout Wireless System Software. This chapter describes the components shipped with the
wireless switch and switch requirements.
Kit Contents
Your RBT‐8100 Wireless Switch kit includes the following components:
•
A Quick Start Guide
•
Switch chassis
•
One 250 W SSI PFC non‐redundant power supply
•
One power cord (U.S. version)
•
One null modem cable
•
Mounting screws (server and backplane boards)
Front Panel Controls and Indicators
Figure
Table 1‐1 describes the control button functions and Table
Figure 1-1
A. Power button and power LED
B. Network activity LEDs (NIC1, NIC2)
C. System fault LED
D. Hard drive activity LED
E. Reset button
RBT-8100 Wireless Switch Overview
1‐1 shows the chassis front panel.
Front Panel Controls and Indicators
1‐2 describes the LED status.
RBT-8100 Wireless Switch Installation Guide 1-1
1