Configuring Cdp - Cisco 500 Series Administration Manual

Administration: Discovery

Configuring CDP

Configuring CDP
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide
- Available Bytes Left—Total number of available bytes left to send for
additional LLDP information in each packet.
This section describes how to configure CDP.
It covers the following topics:
• CDP Properties
• CDP Interface Settings
• CDP Local Information
• CDP Neighbors Information
• CDP Statistics
CDP Properties
Similar to LLDP, the Cisco Discovery Protocol (CDP) is a link layer protocol for
directly-connected neighbors to advertise themselves and their capabilities to
each other. Unlike LLDP, CDP is a Cisco proprietary protocol.
CDP Configuration Workflow
The followings is sample workflow for configuring CDP on the device. You can also
find additional CDP configuration guidelines in the LLDP/CDP section.
Enter the CDP global parameters using the CDP Properties page
Configure CDP per interface using the Interface Setting page
If Auto Smartport is used to detect the capabilities of CDP devices, enable CDP in
the Smartport Properties page.
9
168