Veeco MS40 Operation And Maintenance Manual page 34

HAND-HELD REMOTE PORT
Allows the handheld remote control to operate the MS-40.
Most of the features of the user Control Panel are also on the
remote control. Specifically, the remote control has an LED
bar graph and numeric display indicating the measured leak
rate of the test object, switches to select between Auto/Manual
ranging, up/down arrow keys for use during manual ranging, a
START button as well as a VENT button. The port itself is a
standard telephone-type connector. The remote is illustrated
in Figure 2-3.
RS-232C PC REMOTE PORT
Allows a remote computer to operate the MS-40 in Standard
Mode and to record the leak rate/testing results of every leak
rate measurement cycle. The port itself is a standard RS-232C
connector.
PRINTER PORT
Allows a standard 36/25 pin PC-compatible printer cable to
be connected to the unit. The printer is used to document the
leak rate/testing results of every leak rate measurement cycle.
The data sent to the printer is encoded with the time and date of
the measurement as well as the tested leak rate, Accept/Reject
indication and Reject set point. The data is printed in a
columnar format so that it may be easily compared. Information is
sent to the printer whenever the user terminates the test cycle by
either pressing the VENT pushbutton or by pressing the START
pushbutton a second time.
A.C. CONNECTOR
Allows A.C. power to be connected to the MS-40. A standard
plug/cord is used.
1109-186-00 Rev. C 2-17