Table of Contents
Advertisement
4.10 Troubleshooting Aids
The MS-40 computer's function is to continually monitor the system status
and operational data. If an error is detected, it will immediately display that
error on the User Panel. If any part of the leak detector's equipment needs to
be shut down or if its operation needs to be altered in any way, the computer
will instantaneously perform the function.
The Error Code will appear on the User Panel. Specifically, the error code
EE appears in the numeric display of the User Panel. At the same time, the
alphanumeric display indicates the specific Error Code (e.g., ERROR 08 ).
The following table lists and describes the unit's error or fault and explains the
unit's reaction to the problem. Also included in the table are the probable
causes and recommended corrective actions necessary for repair of the unit.
Vacuum Instrument Corp.
2099 Ninth Avenue
Ronkonkoma, NY 11779
631.737.0900
1109-186-00 Rev. C
4-33
Hide quick links:
Advertisement
Table of Contents
