Product Conformity - ABB ACS 400 User Manual

3~ Input V
1
380V - 480V ACS401-
±10 % 50/60 Hz
Max. wire sizes and screw torque of connectors
***
Power terminals mm
Control terminals mm
****
Line fuse 3~ A
ACS401-
Power losses
Power circuit W
Control circuit W
*** Follow local rules for cable size; see I. Shielded motor cable is recommended.
**** Fuse type: UL class CC or T.
Use 60°C rated power cable (75°C if T
T Product Conformity
The ACS 400 complies with European requirements:
• Low Voltage Directive 73/23/EEC with amendments
• EMC Directive 89/336/EEC with amendments
Corresponding declarations and a list of main standards are available on request.
Note! See ACS 400 EMC instructions.
An adjustable frequency drive and a Complete Drive Module (CDM) or a Basic Drive Module
(BDM), as defined in IEC 61800-2, is not considered as a safety related device mentioned in the
Machinery Directive and related harmonized standards. The CDM/BDM/adjustable frequency drive
can be considered as a part of safety device if the specific function of the CDM/BDM/adjustable
frequency drive fulfills the requirements of the particular safety standard. The specific function of
the CDM/BDM/adjustable frequency drive and the related safety standard is mentioned in
documentation of the equipment.
22
X004- X005-
3-2 3-2
2
10, AWG6 (stranded)/
Torque 1.3-1.5 Nm
2
0.5 - 1.5 (AWG22...AWG16) / Torque 0.4 Nm
10 10 16
90 120 170
6 6 6
amb
400 V series
X006- X009- X011-
3-2 3-2 3-2
16 25
230 330
6 6
°
above 45 C).
X016- X020- X025-
3-2 3-2 3-2
16, AWG4 35, AWG2 (stranded)
(stranded) / / Torque 3.2-3.7 Nm
Torque
1.5-1.8 Nm
35 50 50
450 560 660
6 6 6
ACS 400 User's Manual
X030- X041-
3-2 3-2
63 80
900 1100
6 6