ABB ACS 400 User Manual page 98

Code Description
4009 ACT1 MINIMUM
Minimum value for actual value 1 (
minimum and maximum settings.
4010 ACT1 MAXIMUM
Maximum value for actual value 1 (
minimum and maximum settings.
4011 ACT2 MINIMUM
Minimum value for actual value 2 (
4012 ACT2 MAXIMUM
Maximum value for actual value 2 (
Figure 38 Actual value scaling. The range of the analog input signal is set by parameters 1301 and
1302 or parameters 1304 and 1305, depending on the analog input used.
88
1). Refer to Figure 38 and to Group 13 parameters for analog input
ACT
1). Refer to Figure 38 and to Group 13 parameters for analog input
ACT
2). Refer to parameter 4009.
ACT
2). Refer to parameter 4010.
ACT
1 (%)
ACT
1
ACT MAXIMUM
1
ACT MINIMUM
AI min
A 1 (%)
CT
1
ACT MINIMUM
1
ACT MAXIMUM
AI min
Analog input signal
AI max
Analog input signal
AI max
ACS 400 User's Manual