Motor - ABB ACS 400 User Manual

Note! DI 4 and 5 are electrically isolated from DI1, 2, and 3. To utilize DI4 and 5, a jumper
must be connected. See section L for details.
Note! Terminals 3, 6 and 8 are at the same potential.
RS485 terminal X3
X3 Description
1 Screen
2 B
3 A
4 AGND
5 Screen
K Motor
Check for motor compatibility. The motor must be a three-phase induction motor, with V
to 240 V for ACS401-XXXX-1-X or 380 to 480 V for ACS401-XXXX-3-X and f
60 Hz.
The motor nominal current, I
Sections G and S).
Warning! Ensure the motor is compatible for use with the ACS 400. The ACS 400 must be
installed by a competent person. If in doubt, contact your local ABB sales or service office.
ACS 400 User's Manual
, must be less than the nominal output current of the ACS 400, I
N
J2
RS485 interf.
Not
Termin.
termin.
= open
= closed
from 200
N
either 50 Hz or
N
(See
2
15