About This Document; Using The Product Manual; Legal Disclaimer; Explanation Of Symbols - ABB i-bus VC/S 4 1 Series Product Manual

Valve drive controller

Table of Contents

ABB i-bus® KNX ABOUT THIS DOCUMENT

About this document

1.1

This manual provides detailed technical information on the function, installation and programming of

the ABB i-bus® KNX device.

1.2

ABB AG reserves the right to make changes to the product or modify the contents of this document

without prior notice.

The agreed properties are definitive for any orders placed. ABB AG does not accept any responsibility

whatsoever for potential errors or possible lack of information in this document.

ABB AG reserves all rights in this document and in the subject matter and illustrations contained therein.

Reproduction, transfer to third parties or processing of the content – including sections thereof – is not

permitted without the prior written consent of ABB AG.

1.3

▶

•

–

Tab. 1: Explanation of symbols

Note about navigation in the PDF: Key combination 'Alt + left arrow'

jumps to the previous view/page

Instructions in specified sequence and result

Individual actions

Priorities

Processes run by the device in a specific sequence

List level 1

List level 2

Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 7

Table of Contents