Common Controller Settings; Introduction To Common Controller Settings - Danfoss ECL Comfort 210 Installation Manual

Installation Guide

7.0 Common controller settings

7.1 Introduction to common controller settings

Some general settings which apply to the entire controller are
located in a specific part of the controller.
To enter the common controller settings:
Action: Purpose:
Choose 'MENU' in any circuit
Confirm
Choose the circuit selector at the top
right corner in the display
Confirm
Choose 'Common controller settings'
Confirm
Danfoss District Energy
ECL Comfort 210, application A230
Examples:
VI.LG.H1.02
Circuit selector
DEN-SMT/DK 89