Installation Guide
2.3 Mounting
2.3.1 Mounting the ECL Comfort controller
For easy access, you should mount the ECL Comfort controller near
the system. Select one of the following methods using the same
base part (code no. 087H3220):
•
Mounting on a wall
•
Mounting on a DIN rail (35 mm)
ECL Comfort 210 can be mounted in an ECL Comfort 310 base part
(for future upgrade).
Screws, PG cable glands and rawlplugs are not supplied.
Locking the ECL Comfort controller
In order to fasten the ECL Comfort controller to its base part, secure
the controller with the locking pin.
Mounting on a wall
Mount the base part on a wall with a smooth surface. Establish the
electrical connections and position the controller in the base part.
Secure the controller with the locking pin.
10
DEN-SMT/DK
ECL Comfort 210, application A230
VI.LG.H1.02
Danfoss District Energy