Controller - Operation And Function - Danfoss M150 Service Manual

Controller - Operation and function

ECO
ON/OFF
Electronic controls
The electronic controls ensure that the set
temperature is maintained.
Following any power failure, the tempera-
ture settings are automatically recalled.
ECO mode:
In ECO mode the set point is higher than in
serving mode.
ECO mode is switched ON/OFF by pushing
the ECO button
ECO mode is also switched ON when the
door has not been opened for 3 hours,
and switched OFF again at the first door
opening.
Manual defrosting
If there is a need for manual defrosting,
push the ECO button for more than 2 sec-
ond and a manual defrost will start.
After 30 min. the electronic control will
return to normal mode.
Temperature display
The display shows the actual temperature
in the cabinet, and indicates that power is
connected.
Temperature setting
Push the buttom
and to decrease the set point.
Light ON/OFF
Press the button
turn off the light.
ON/OFF
Push and hold the buttom
2 sec. to switch the appliance on and off.
3
Temperature +
Temperature -
fig. 6
to increase set point
briefly to turn on and
for more than
GB