Danfoss ECL Comfort 210 Installation Manual page 11

Installation Guide ECL Comfort 210, application A230
Mounting on a DIN rail (35 mm)
Mount the base part on a DIN rail. Establish the electrical
connections and position the controller in the base part. Secure
the controller with the locking pin.
Dismounting the ECL Comfort controller
In order to remove the controller from the base part, pull out the
locking pin by means of a screwdriver. The controller can now be
removed from the base part.
Danfoss District Energy
VI.LG.H1.02 DEN-SMT/DK 11