Danfoss ECL Comfort 210 Installation Manual page 50

Installation Guide
Infl. - max. (room temp. limitation, max.)
Circuit
1
Determines how much the desired flow temperature will be influenced
(decreased) if the actual room temperature is higher than the desired room
temperature (P control).
-9.9:
The room temperature has a big influence.
0.0:
The room temperature has no influence.
Infl. - min. (room temp. limitation, min.)
Circuit
1
Determines how much the desired flow temperature will be influenced
(increased) if the actual room temperature is lower than the desired room
temperature (P control).
0.0:
The room temperature has no influence.
9.9:
The room temperature has a big influence.
50 DEN-SMT/DK
ECL Comfort 210, application A230
11182
Setting range Factory setting
-9.9 ... 0.0 -4.0
11183
Setting range Factory setting
0.0 .... 9.9 0.0
VI.LG.H1.02
Danfoss District Energy